Mise à jour sur le traitement des minéraux de Taronga
25 Avril 2024
Premier étain Plc
("First Tin" ou "la société")
Mise à jour sur le traitement des minéraux de Taronga
Updated mineral processing testwork has shown significantly improved recoveries
First Tin PLC, a tin development company with advanced, low capex projects in Australia and Germany, is pleased to announce that ongoing mineral processing testwork for the Definitive Feasibility Study ("DFS") at its Taronga Tin Project ("Taronga") in Australia continues to show improved recoveries.
Le projet appartient à la filiale australienne détenue à 100 % par First Tin, Taronga Mines Pty Ltd (« TMPL »).
Results of the crushing testwork for the LG sample (0.10% Sn head grade) have shown that:
· Conventional crushing recovers 72.5% of tin into 46.5% of mass grading 0.16% Sn in the minus 2.8mm fraction.
· Single pass vertical shaft impact (VSI) crushing of the plus 2.8mm fraction from the above conventional crushing, recovers an additional 11.7% of tin into 11.0% of the initial mass, grading 0.08% Sn, to the minus 2.8mm fraction.
· By combining the two minus 2.8mm fractions, a total of 84.2% of the initial tin is recovered to 57.5% of the initial mass with a grade increase from 0.10% Sn to 0.15% Sn. This is an improvement from the 82% recovery previously reported on 18 September 2023 for the HG sample (0.18% Sn).
The gravity concentration result for the bulk LG sample previously reported on 7 March 2024 was 71.5%.
By combining the crushing and gravity concentration results, a total recovery can be calculated for the LG sample as:
· Crushing: 84.2% recovery
· Gravity concentration: 71.5% recovery
· Combined: 60.2% recovery
This confirms recoveries are still good at head grades below the average grade being mined and therefore increases confidence in overall recoveries for the project.
Given these results, a second HG bulk sample has been collected (HG2, head grade 0.15% Sn) to be tested using the refined testwork flowsheet used for the LG sample. This includes classification prior to spiral concentration and improved locked cycle crushing and tabling.
The crushing testwork of this sample has provided the following results to the minus 2.8mm fractions:
· Conventional crush: 66.8% of tin in 23.2% of mass grading 0.42% Sn
· 1st Pass VSI: 24.3% of tin in 20.9% of mass grading 0.17% Sn
Combining conventional and 1st pass VSI crushing results gives:
· 91.2% recovery of tin in 44.1% of mass grading 0.30% Sn
These are excellent results, significantly better than the 82% reported for the original HG sample and the 84.2% reported for the LG sample.
If gravity concentration recoveries can be shown to be similar to those obtained for the LG samples (i.e., 71.5%), then total recovery at a head grade of 0.15% Sn should be around 65-66%. This work will be reported as it is received.
First Tin's CEO, Bill Scotting, comments: "These excellent results build on our existing knowledge of the mineral processing characteristics of the Taronga tin deposit gained from work undertaken over the last 40 years. Achieving a 60% overall recovery rate for the LG material closely aligns with the data obtained by Newmont, substantially de-risking the project by demonstrating that recoveries are good for this below average grade material. If the gravity results from the second high grade sample are shown to be similar to those obtained for the LG sample, the overall recovery for the deposit will be significantly better, positively bolstering the project's economics. We look forward to the upcoming results."
Enquêtes
Première boîte | Via SEC Newgate ci-dessous |
Bill Scotting - Directeur général |
|
Arlington Group Asset Management Limited (conseiller financier et associé Broker)
| |
Simon Catt | +020 (7389)5016 |
WH Ireland Limited (Conjoint Broker) | |
Harry Ansel | +020 (7220)1670 |
SEC Newgate (Communication Financière) | |
Elizabeth Cowell / Molly Gretton |
Notes aux rédacteurs
First Tin est une entreprise de production d'étain éthique, fiable et durable dirigée par une équipe de spécialistes renommés de l'étain. La Société s'efforce de devenir un fournisseur d'étain dans des juridictions sans conflit et à faible risque politique grâce au développement rapide d'actifs d'étain de grande valeur et à faibles investissements en Allemagne et en Australie, qui ont été considérablement réduits par les risques, grâce à des travaux approfondis entrepris à ce jour.
L’étain est un métal essentiel, vital dans tout plan visant à décarboner et à électrifier le monde, mais l’Europe en a très peu d’approvisionnement. La demande croissante, conjuguée aux pénuries, devrait conduire l’étain à connaître des marchés déficitaires persistants dans un avenir prévisible.
L'objectif de First Tin est d'utiliser les meilleures normes environnementales pour mettre en production deux mines d'étain en trois ans, en fournissant la provenance de l'approvisionnement pour soutenir les révolutions énergétiques et technologiques mondiales actuelles.
RNS peut utiliser votre adresse IP pour confirmer le respect des termes et conditions, pour analyser votre interaction avec les informations contenues dans cette communication et pour partager cette analyse de manière anonyme avec d'autres dans le cadre de nos services commerciaux. Pour plus d'informations sur la manière dont RNS et la Bourse de Londres utilisent les données personnelles que vous nous fournissez, veuillez consulter notre Politique de confidentialité.